Recent Notes
Displaying keyword search results 1 - 10
Created by Fang on March 30, 2012 10:07:25
Last update: March 30, 2012 10:09:08
After a user resets a password, I want to force the user to change the password before she gets access to secured content. This is usually done with a servlet filter. But with Spring MVC, you can also use a HandlerInterceptor . According to Spring JavaDoc: HandlerInterceptor is basically similar to a Servlet 2.3 Filter, but in contrast to the latter it just allows custom pre-processing with the option of prohibiting the execution of the handler itself, and custom post-processing. Filters are more powerful, for example they allow for exchanging the request and response objects that are handed down the chain. Note that a filter gets configured in web.xml, a HandlerInterceptor in the application context. As a basic guideline, fine-grained handler-related preprocessing tasks are candidates...
Created by Fang on March 02, 2012 13:23:35
Last update: March 02, 2012 13:23:35
The landing page after login can be configured with the default-target-url attribute of form-login . If a user was redirected to the login form after requesting a restricted URL, she's redirected to the original requested page after successful login.
An easy configuration looks like this:
<beans:beans xmlns="http://www.springframework.org...
But there are times that you want to do more initialization after login (such as loading user data), or apply more complex logic before redirecting. This is where the authentication-success-handler-ref attribute comes into play. You create a class that implements org.springframework.security.web.authentication.AuthenticationSuccessHandler and use that as the authentication-success-handler-ref :
<http
entry-point-ref="authProcessFilterEn...
This is a skeleton implementation:
public class MyAuthenticationSuccessHandler implem...
Created by James on February 02, 2012 09:20:22
Last update: February 02, 2012 09:20:22
This example came from the jQuery validation documentation. The required rule can be used to validate a required selection box when you set the value of the first option to empty.
<!DOCTYPE HTML>
<html>
<head>
<scrip...
The error message is the title since no error message is specified. A more fully defined validation check would look like this:
$('#my-form').validate({
errorElement: "p",
...
Created by Fang on November 10, 2011 09:26:12
Last update: November 10, 2011 09:26:12
Syntax highlighted XML schema for JSF 2.0 Application Configuration Resource File ( faces-config.xml ). Almost 3000 lines!
<?xml version="1.0" encoding="UTF-8"?>
<xsd:sch...
Created by Dr. Xi on February 12, 2010 22:52:27
Last update: November 08, 2011 19:48:09
For Tomcat 6, there's no default manager username and password. You do have to set it up yourself, though it's pretty straightforward. The Tomcat manager webapp is restricted to users with a role named manager . So you'll need to create a user and assign the manager role to it.
Edit $CATALINA_BASE/conf/tomcat-users.xml to read:
<?xml version='1.0' encoding='utf-8'?>
<!--
...
For tomcat 7:
<tomcat-users>
<role rolename="manager"/>
...
Created by Fang on September 07, 2009 20:44:15
Last update: November 03, 2011 14:43:19
Step 1: Repackage a web app as EAR A Java EE application is a multimodule Maven project. At the very least you'll need to package a WAR and an EAR. To get started, I'll simply re-package the simple webapp as an EAR. Create a directory named javaee-app Copy the webapp from here to javaee-app . Rename struts1app to webapp . Create pom.xml under javaee-app :
<project> <modelVersion>4.0.0</modelVersion>... Create a directory named ear under javaee-app . Create pom.xml under ear : <project> <modelVersion>4.0.0</modelVersion>... Modify pom.xml in the webapp directory so that it looks like this: <project> <modelVersion>4.0.0</modelVersion> ... Build with " mvn package " in the javaee-app directory. You can see that ear-1.0.ear is successfully generated in javaee-app/ear/target . Maven successfully resolves dependencies between the sub-projects....
Created by magnum on September 27, 2011 09:32:18
Last update: September 27, 2011 09:33:04
Use tcpdump to monitor traffic on a network: To print all incoming and outgoing packets on host 192.168.0.1 :
tcpdump host 192.168.0.1 To print all incoming and outgoing IP packets on host firebird : tcpdump ip host firebird To write raw packets to a file, rather than parsing and printing them out: tcpdump ip host firebird -w /tmp/firebird.pcap To listen on interface eth0 (without this, tcpdump listens on the lowest numbered, configured up interface except loopback): tcpdump -i eth0 ip Use switch -X for more verbose output: tcpdump -i eth0 ip -X host 192.168.0.1 Outgoing from 192.168.0.1 : tcpdump -i eth0 ip -X src host 192.168.0.1 Incoming to 192.168.0.1 : tcpdump -i eth0 ip -X dst host 192.168.0.1 More verbose output: tcpdump -i eth0 tcp -vvX host 192.168.0.1...
Created by freyo on September 07, 2011 16:46:14
Last update: September 07, 2011 19:23:00
The Android unit test framework is based on JUnit 3 , not JUnit 4. Test cases have to extend junit.framework.TestCase or a subclass (such as android.test.InstrumentationTestCase ). Tests are identified by public methods whose name starts with test , not methods annotated with @Test (as in JUnit 4). An Android test suite is packaged as an APK, just like the application being tested. To create a test package, first you need to identify the application package it is testing. Google suggests to put the test package source in a directory named tests/ alongside the src/ directory of the main application. At runtime, Android instrumentation loads both the test package and the application under test into the same process. Therefore, the tests can invoke methods on...
Created by freyo on August 17, 2011 12:29:46
Last update: August 17, 2011 12:29:46
In Android.mk , you can define LOCAL_JARJAR_RULES like this:
LOCAL_JARJAR_RULES := $(LOCAL_PATH)/jarjar-rules.t...
and in jarjar-rules.txt define a rule like this:
rule org.bouncycastle.** com.android.@0
The build will change all org.bouncycastle to com.android.org.bouncycastle . Therefore, in your classes which are dependent on the library produced, the import statements should look like:
import com.android.org.bouncycastle...
Help for the jarjar utility (in prebuilt/common/jarjar/ ):
$ java -jar jarjar-1.0rc8.jar
Jar Jar Links - ...
Created by Dr. Xi on August 11, 2007 15:56:47
Last update: July 19, 2011 08:15:55
Here's a list of common TCP ports. You can find a more complete list here: http://www.gasmi.net/docs/tcp.html . Port Number Service Description 21 FTP File Transfer Protocol 22 SSH Secure Shell 23 Telnet Telnet remote login 25 SMTP Simple Mail Transfer Protocol 70 gopher Gopher 79 finger Finger 80 HTTP Hyper Text Transfer Protocol (WWW) 88 Kerberos Kerberos authentication 94 tivoli Tivoli Object Dispatcher 110 pop3 Post Office Protocol Version 3 123 ntp Network Time Protocol 137 netbios NetBIOS Name Service 138 netbios NetBIOS Datagram 139 netbios NetBIOS Session 143 imap Internet Message Access Protocol 161 snmp Simple Network Management Protocol 162 snmptrap SNMP trap 194 irc Internet Relay Chat Protocol 389 ldap Lightweight Directory Access Protocol 443 https Secure HTTP 445 SMB MS Server Message...
