Recent Notes
Displaying keyword search results 1 - 10
Created by Fang on November 10, 2011 09:26:12
Last update: November 10, 2011 09:26:12
Syntax highlighted XML schema for JSF 2.0 Application Configuration Resource File ( faces-config.xml ). Almost 3000 lines!
<?xml version="1.0" encoding="UTF-8"?>
<xsd:sch...
Created by Fang on October 31, 2011 21:10:10
Last update: October 31, 2011 21:13:10
In this example I'll add a parameter to a facelets template. The example contains three tabs, each tab points to a different page. The tab control is shared among all pages, therefore, it is put in the template.
Starting from the simple facelet example , make these additions:
Create a new template WEB-INF/templates/tabs.xhtml :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Stric...
Add a page for the about tab ( about.xhtml ):
<?xml version="1.0" encoding="UTF-8"?>
<ui:comp...
Add a page for the news tab ( news.xhtml ):
<?xml version="1.0" encoding="UTF-8"?>
<ui:comp...
Add a page for the partner tab ( partner.xhtml ):
<?xml version="1.0" encoding="UTF-8"?>
<ui:comp...
Build and re-deploy the application. Launch the browser and load page http://localhost:8080/facelet-demo/about.jsf .
This is a screenshot:
Created by mee2 on October 20, 2011 16:52:33
Last update: October 20, 2011 16:54:17
Alfresco RESTful URLs provided by Web Scripts are extensively documented, but examples are hard to come by. This makes it hard to ramp up for beginners. Here are some examples I tested on 3.4.4 enterprise edition and 4.0a community edition, with the results documented. To list the available scripts:
http://localhost:8081/alfresco/service/index There's a Refresh Web Scripts button at the bottom of the page. If you add a Web Script, you need to click that button in order for the system to know about your addition. To get information about the root folder ( Company Home ): http://localhost:8081/alfresco/service/cmis/p To get information about the folder Data Dictionary : http://localhost:8081/alfresco/service/cmis/p/Data... To get information about the folder Data Dictionary/Space Templates : http://localhost:8081/alfresco/service/cmis/p/Data... You get the idea. To list the children...
Created by freyo on September 09, 2011 11:43:36
Last update: September 09, 2011 11:45:45
When you run automated Android tests with Eclipse or from the command line, you get text output, which isn't good for reporting purposes. If you run a large set of test cases with automated build, the text report isn't very helpful. Fortunately, Android CTS generates test reports in XML with accompanying XSL to make it look nice in a browser. To run your own tests with Android CTS: Download Android CTS Make a new directory MyRepository under android-cts , alongside the existing repository directory. Copy host_config.xml from repository to MyRepository Create directory plans under MyRepository , add a test plan ( MyTests.xml ):
<?xml version="1.0" encoding="UTF-8"?> <TestPla... Create directory testcases under MyRepository . Copy TestDeviceSetup.apk from repository/testcases to MyRepository/testcases Under MyRepository/testcases , create a test...
Created by freyo on August 25, 2011 09:07:40
Last update: August 25, 2011 20:45:43
This is a list of built-in Android permission values: Permission Description Since API Level android.permission.ACCESS_CHECKIN_PROPERTIES Allows read/write access to the "properties" table in the checkin database, to change values that get uploaded. 1 android.permission.ACCESS_COARSE_LOCATION Allows an application to access coarse (e.g., Cell-ID, WiFi) location 1 android.permission.ACCESS_FINE_LOCATION Allows an application to access fine (e.g., GPS) location 1 android.permission.ACCESS_LOCATION_EXTRA_COMMANDS Allows an application to access extra location provider commands 1 android.permission.ACCESS_MOCK_LOCATION Allows an application to create mock location providers for testing 1 android.permission.ACCESS_NETWORK_STATE Allows applications to access information about networks 1 android.permission.ACCESS_SURFACE_FLINGER Allows an application to use SurfaceFlinger's low level features 1 android.permission.ACCESS_WIFI_STATE Allows applications to access information about Wi-Fi networks 1 android.permission.ACCOUNT_MANAGER Allows applications to call into AccountAuthenticators. Only the system can get this permission. 5 android.permission.AUTHENTICATE_ACCOUNTS...
Created by woolf on June 25, 2011 10:55:08
Last update: June 25, 2011 10:57:15
My C drive was seriously fragmented with about 20% free space. So I ran the built-in Windows disk defrag utility. To my surprise it doesn't work at all! I tried to defragment multiple times and every time it comes back without doing much work. Then I realized that perhaps it didn't know how to get the job done and needed some help. Here's the list of things I did to help the defragmentor out: Relocate the paging file to a different drive and reboot. If the paging file ( pagefile.sys ) is seriously fragmented, it can't be defragmented, and in turn it blocks other files from being defragmented. If you only have one drive (C:), try to make it smaller or eliminate it entirely for...
Created by magnum on June 23, 2011 13:44:21
Last update: June 23, 2011 13:59:26
Fedora/Redhat List current status (for httpd):
# chkconfig --list httpd Warning: this works only when one of /etc/rc runlevel .d/ K NN name or /etc/rc runlevel .d/ S NN name exists. It exports wrong status when both K and S scripts exist (in which case the status should be enabled). Enable sshd for run levels 2, 3, 5: # chkconfig --level 2,3,5 sshd on Disable sshd for run levels 2, 3, 5: # chkconfig --level 2,3,5 sshd off By default, the on and off options affect only runlevels 2, 3, 4, and 5. Debian/Ubuntu Add apache2 with defaults : # update-rc.d apache2 defaults If defaults is used then update-rc.d will make links to start the service in runlevels 2, 3, 4, 5 and to stop...
Created by Dr. Xi on April 26, 2011 20:12:01
Last update: April 28, 2011 15:28:12
An XML schema is a definition of XML files, in XML. It plays the same role as old-time DTDs. Overall, an XML schema file looks like this:
<schema attributeFormDefault = (qualified | u... The attribute meanings: targetNamespace : The name space targeted by the current schema definition. It can be any URI. id and version : For user convenience, the W3C spec defines no semantics for them. xml:lang : Natural language identifier defined by RFC 3306 . attributeFormDefault and elementFormDefault : Set default values for the form attribute for attribute and element declarations. blockDefault and finalDefault : Set default values for the block and final attributes for attribute and element declarations. The W3C defined some built-in datatypes . Examples of primitive datatypes are: string ,...
Created by nogeek on March 21, 2011 15:31:26
Last update: March 21, 2011 15:32:35
Inventory list for configuring a JDBC data source in JBoss:
Put *-ds.xml configuration file in server/yourServer/deploy , e.g., hsqldb-ds.xml
Other needed files in server/yourServer/deploy : jboss-local-jdbc.rar , jboss-xa-jdbc.rar , jca-jboss-beans.xml , transaction-jboss-beans.xml
Copy jboss-jca.deployer directory to server/yourServer/deployers
Copy standardjbosscmp-jdbc.xml to server/yourServer/conf
Make sure the following lines appear in server/yourServer/conf/jboss-service.xml
<mbean code="org.jboss.ejb.plugins.cmp.jdbc.metada...
Created by woolf on February 10, 2011 12:51:14
Last update: February 10, 2011 13:06:11
Windows command line shell does not come with a sleep command. One trick is to emulate sleep using the ping command:
C:\>ping /?
Usage: ping [-t] [-a] [-n count...
To sleep for about 5 seconds:
@rem make sure to ping a non-existing IP, otherwis...
If you have the Windows Resource Kit installed, it does provide a sleep command:
C:\>sleep
Usage: sleep time-to-sleep-in-s...
